Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====UniFi AP HD===== {{:products:uap-ac-hd:uap-ac-hd-front-2x.png?200}} **Series Type:** UniFi\\ **Website Link:** [[https://unifi-hd.ubnt.com/|AP HD]]\\ **Model:** UAP-AC-HD\\ **Type:** 802.11ac Wave 2 Enterprise Wi-Fi Access Point\\ **Description:** //Deploy the UniFi HD AP in high-density environments requiring maximum wireless performance. The UniFi HD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3at PoE+ compatibility. //\\ ===== Specifications ===== ^ UAP‑AC‑HD ^ ^ | Dimensions | 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89") | | Weight | 700 g (1.54 lb) | | With Mounting Kits | 830 g (1.83 lb) | | Networking Interface | (2) 10/100/1000 Ethernet Ports | | Buttons | Reset | | Power Method | 802.3at PoE+ | | Supported Voltage Range | 44 to 57VDC | | Power Supply | UniFi Switch (PoE) | | Power Save | Supported | | Maximum Power Consumption | 17W | | **Maximum TX Power** | | | 2.4 GHz | 6-25 dBm | | 5 GHz | 6-25 dBm | | Antennas | (2) Dual-Port, Dual-Polarity Antennas, , 2.4 GHz: 3 dBi each, 5 GHz: 4 dBi each | | Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 | | Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.11w/PMF | | BSSID | Up to 8 per Radio | | Mounting | Wall/Ceiling (Kits Included) | | Operating Temperature | -10 to 70° C (14 to 158° F) | | Operating Humidity | 5 to 95% Noncondensing | | Certifications | CE, FCC, IC | \\ ^ Advanced Traffic Management ^ ^ | VLAN | 802.1Q | | Advanced QoS | Per-User Rate Limiting | | Guest Traffic Isolation | Supported | | WMM | Voice, Video, Best Effort, and Background | | Concurrent Clients | 1000+ | \\ ^ Supported Data Rates (Mbps) ^ ^ | **Standard** | **Data Rates** | | 802.11ac | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) | | 802.11n | 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) | | 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | | 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | | 802.11b | 1, 2, 5.5, 11 Mbps | ===== LED Status Light Ring ===== - **Blue Ring - Solid** - Normal Operation - **White Ring - Flashing** - Unconfigured state ===== Troubleshooting tips ===== - **No light/power** - Check ethernet connection. - Are you connected to a PoE enabled switch or PoE injector? - Does the switch/injector have power? - **Can only connect to the primary/default VLAN** - Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled') ===== FAQ ===== {{page>apfaq&nofooter}} * **Does this AP come with a PoE injector for use on a non-PoE enabled switch?** * No, it is recommended to use them with a PoE enabled switch like the [[products:unifi:unifi_switch_8-150w|UniFi Switch 8-150W]] or better. ===== Resources ===== <WRAP download> [[https://www.ubnt.com/downloads/datasheets/unifi/UniFi_UAP-AC-HD_DS.pdf|Datasheet]]\\ [[https://dl.ubnt.com/guides/UniFi/UniFi_UAP-AC-HD_QSG.pdf|Quickstart Guide]]\\ </WRAP> {{page>hardwarenavbox&nofooter}} products/unifi/unifi_ap_hd.txt Last modified: 2018/05/21 05:07by kzboy